Nice RobusKit 600  RB600KCE Nice RobusKit 600
Sliding Gate Operator Kit - RB600KCE
Nice RobusKit 600  RB400KCE



             Item ADF0811


Nice RobusKit 600

Nice RobusKit 600


INCLUSIONS:

1 x Operator for sliding gates NICE ROBUS 600
1 x Embedded control board
1 x Plug-in radio receiver NICE SMXIS
2 x NICE Smilo SM2 remote transmitter
1 x Pair of external photocells NICE MOFB with BLUEBUS

Suitab Suitable for gates up to 600 KGS.



Nice RobusKit 600 - RB600KCE Slide Gate Operator Kit

Nice RobusKit 600  RB600KCE RRP $1,048
OUR PRICE $779.95



payday loan ..Hits         Rating ...rate it!






Features



Specifications



Technical



Installation



Nice RB400

Pinion Z: 15
Module: 4
Pitch: 12.6mm
Pitch diameter: 60mm
Peak thrust 18 Nm
Nominal torque 9 Nm
Peak thrust corresponding to the ability to develope a force capable of moving the leaf 600 N
Nominal torque corresponding to the ability to develope a force capable of maintaining the movement of the leaf 300 N
Nominal torque speed 0.15 m/s
Idling speed (the control unit allows 6 speeds to be programmed, approx. equal to: 100, 85, 70, 55, 45, 30%) 70, 55, 45, 30% 0.31 m/s
Maximum frequency of operating cycles (nominal torque) 100 cycles / day
Maximum continuous operating time (nominal torque) 7 minutes
Durability Estimated between 20,000 and 250,000 cycles
Power supply 230Vac (+10% -15%) 50/60Hz
Thrust maximum absorbed power 515W (2.5A)
Insulation class 1 (a safety grounding system is required)
Emergency power supply With PS124 optional accessory
Flashing light output For 2 LUCYB flashing lights (12V, 21 W lamp)
Open Gate Indicator Output For one 24V maximum 4W bulb (the output voltage may vary between –30 and +50% and can also control small relays
BLUEBUS Output One output with a maximum load of 15 BlueBus units
STOP input For normally open contacts, for 8,2K?; constant resistance, or normally closed contacts; with self-recognition (any variation from the memorized status causes the “STOP” command)
Step-by-step Input For normally open contacts (the closing of the contact causes the “STEP-BY-STEP” command)
OPEN input For normally open contacts (the closing of the contact causes the “OPEN” command)
CLOSE input For normally open contacts (the closing of the contact causes the “CLOSE” command)
Radio connector “SM” connector for SMXI, SMXIS or OXI receivers
Radio AERIAL Input 52?for RG58 or similar type of cable
Programmable functions 8 ON-OFF functions and 8 adjustable functions
Self-Recognition functions Self-recognition of the type of “STOP” device (Normally Open, Normally Closed contact or 8,2K?) Self-recognition of the gate length and calculation of the deceleration points and the partial opening point.
Operating temperature -20°C ÷ +50°C
Use in acid, saline or potentially explosive atmosphere No
Protection class IP 44
Dimensions 330 × 210 × 303 mm
Weight 11 kg
Plug-in radio receiver NICE SMXIS
Decoding Rolling code, 64 bit SMILO
Frequency 433.92 MHz
Input impedance 52 ohm
Outputs 4 (on connector SMXI)
Sensitivity better than 0.5µV
Working temperature -10°C ÷ +55°C
Transmitter compatibility SMILO
NICE Smilo SM2 remote transmitter
Frequency 433.92 MHz
Coding 64-bit digital (18 billion, billion combinations)
Radiated power 100 µW
Number of buttons 2
Power input 12Vdc +20% -40% with a 23A type battery
Average absorption 25 mA
Working temperature -40°C ÷ +85°C
Dimensions Ř 48 × 14 mm
Weight 18 g
Mounting Vertically wall-mounted
Protection class for casing IP55
Weight 50g




DELIVERY



All Day Fencing use Express Post to send your purchase once your payment has been confirmed.

PAYMENT

        

Accepted payment methods: Mastercard, Visa, Bank Deposit, Cheque, Money Order.
Purchases paid through Paypal will be sent immediately via return email. For other forms of payment, goods will not be sent until payment confirmation has been received.
All inquiries or special orders contact All Day Fencing.
Click here for bank deposit details.