All Day Fencing manufacture a range of solid timber pedestrian and driveway gates, to suit your home in period and contemporary designs.
Our gates are built using traditional mortise and tenon joinery ensuring strength in all conditions. Constructed from treated and primed timbers, these gates are extremely durable and come with a limited 25 year warranty, just add your colour!
All our gates are made to your measurements at no extra cost. We also manufacture custom designs, please email a picture or drawing of your design for a free quotation.
To order a free quotation simply select your preferred design from the photos on this page, add a motif (free) if required then fill out and submit the quotation form on the right. If you are after a quote for supply and installation please contact your nearest branch by using the book a quote button in the left menu.
Add immediate appeal to your home with well designed and constructed feature fencing and gates. The front gate is the entry to your home and by improving the entrance you can change the way people perceive your property, as well as increase the value for little expense.
We also manufacture matching Driveway Gates. We can match your existing gate or design a gate around the features and period of your home. Driveway gates carry a heavy load and are generally in high use areas. A galvanised steel frame is fitted to the rear of the gates to increase durability. For heavy gates a roller can be added to support the gates when in the closed position.
Solid timber driveway gates can be manufactured up to 1.8m wide where hinged - and almost any length when fitted to sliding gate tracks and rollers! There are many considerations when choosing your new gate and fence design. What are your requirements? Are you trying to keep the kids in? ..are you looking to improve the street appeal? ..are you trying to block out road noise? ..do you seek privacy? ..wind protection or fire resistance?
Have you got the space for swing gates (gates that open inward?), remember this will reduce your space inside the gate area. You may choose to hinge the gates to form smaller folding sections or do you have room for a sliding gate?
Is the ground level, both across the gate opening and where the gate swings? The bottom of the gate should have a minimum 40mm clearance so the gate does not get stuck on stray rocks or sticks. If the ground level inside the fence is running uphill you will have to allow enough clearance for the gate to open. If the slope is fairly steep, move the posts in 1.5m and open the gates out.
All Day Fencing can build your sliding gate up to 6m wide and 2.7m high! A sliding gate is constructed using a steel frame and base and can be lined with timber panels or pickets to match your decorative fencing.
Horizontal Slat Fencing can modernise the look of your home as well as adding privacy and good looks. Horizontal slat gates are manufactured to last on a 25mm square galvanised steel frame and secured by zinc coated tech screws. Each gate comes with steel reversible hinges and a lock plate.
SLAT DESIGNS MERBOU SLAT GATE MIXED SIZED SLATS
Slats are available in three common sizes, 42mm 66mm and 92mm wide. Other sizes can be custom made. The most common timbers for slat fencing is the treated and primed timber for painting, and the Western Red Cedar for the natural timber look.
Slat Gates can be lined on one side (single sided) or both sides (double sided). Single sided slat gates are 43mm thick including the frame. Double sided gates are 60mm thick.
All Day Fencing manufacture a range of 'Z' Frame timber gates to suit your home in curved, square or picket designs. Made from dressed treated timbers and primed before construction, these gates are economical and built to last.
Gates are manufactured from both treated and primed timbers and select Australian hardwoods. The timber is finger jointed to remove all defects and provides a stable timber that is resistant to bowing warping or twisting. The timber is treated with an organic preservative and coated with a specially designed primer. Treated timber is durable and long lasting and comes with a 25 year warranty against rot, decay or insect attack!
We can also construct your gates from select Australian hardwoods (extra depending on availability). Western Red Cedar is preferred as it is light and easy to stain.
How to measure your gates! 1. Measure the opening size where the gate is to be located (side to side). 2. Deduct 16mm for clearance for single gates, or 24mm for double gates. 3. Measure the height of your opening on both sides. Deduct 40mm for clearance from the largest measurement. If your land is not level the gate can be trimmed up to 50mm to fit. 4. Select the style of gate you require or attach a plan of your custom design. 5. Choose either assembled or DIY Kits.