Traditional Handpacked Brushwood Fencing

Prices range from $211.60 per metre plus GST for an 1800mm high brush fence with gal steel frame and brush roll top and post rolls, subject to site conditions, access, location, extent of work, gates and openings etc.

To prolong the life of a brushwood fence it is advised not to have the brush in constant contact with soil. A treated pine or concrete plinth should be used to seperate the brush from the ground in certain situations. A treated pine plinth constructed from 150mm x 75mm split log, can be installed at a cost of $14.00 per metre. Concrete plinths require an onsite measure and quotation.

The art of handpacked brushwood fencing is a labour intensive skill that requires suitable access to both sides of the fence for the best results. An average 20m fence can take four days to complete and will require a large amount of material. For this reason fences with difficult access may attract an extra charge to cover the extra time in installation.

BRUSH GATES AND ACCESSORIES

PEDESTRIAN GATES

In conjunction with new work $615 including GST
Create opening including cutting base and supply and set gate posts $1208 including GST

DRIVEWAY GATES
In conjunction with new work $1680 including GST
By themselves including supply and set posts $2640 including GST



TIMBER GATES
PEDESTRIAN GATES

Decorative timber pedestrian gate handmade from primed treated pine (examples above or supply your own) including supply and setting of timber posts, ring latch and hinges, 1800mm x 1000mm
In conjunction with other work $835
By themselves $920

DRIVEWAY GATES
Decorative Timber Driveway Gates
Email us for a free quotation.

GATE POSTS
Supply and fit 75 x 75 x 2500mm Galvanised steel posts (subject to ground conditions eg, rock, soil, clay, concrete etc), $320 each including GST.

LETTERBOXES
Through letterboxes installed to brush fence
(see letterboxes under hardware in our menu)
In conjunction with other work, $120 including GST

INSTALLATION
Brushwood fencing can be installed level, on the rake of the ground or stepped for steep sites. Brushwood can be installed in curved or straight lines and up to any height or shape required. If you require other than a straight fence please contact All Day Fencing for a free measure and quotation.