Modular brushwood panels can be installed over a galvanised steel frame or fixed to an existing fence or wall. The panels average 75mm thick and are constructed off site cutting down the onsite installation time. Fitted to a specially constructed steel galvanised steel frame, the panels lock together and are bound by galvanised wire. The Roll Top capping is then thatched to cover the panel joins, posts and top bar.Pre-fabricated brushwood panels are suitable for large level installations where the height of the fence required is 1.8 metres and access to the site is limited. For those who like to do it themselves, modular brushwood panels measuring 1.8 metres high by 1.5 metres wide, can be purchased through our estore.
Modular panels are provided square and can be cut to adapt to small changes in the ground. The panels are the same thickness as handpacked brushwood fences and are impervious to the eye, creating total privacy. Brushwood panels retain their good looks without fading or cracking and can last up to 25 years depending on the area they are installed in.
Brushwood panels can also be used for thatch roofing for pergolas and gazebos. Ideas, plans and DIY kits for brushwood huts and garden structures can be found under our
gate designs! Designing a fence? 
